Click Here to Apply

Please include a cover letter and resume.
The Job ID should be in the subject line of the email.

Department Description:
The Point to Multipoint organization develops point to multipoint RF solutions in both licensed and unlicensed bands. Customers include tier 2 and 3 telephony operators, wireless internet service providers, enterprises such as utilities, and federal, state, and local governments. Point to multipoint technologies include both 802.16e and Canopy.
Scope of Responsibilities/Expectations
The Access Point (AP) Principal Software Engineer is responsible for technical leadership and development in the following areas for an 802.11n based MAC, OS & Networking, Security and User Management, and SNMP and UI. He would be responsible for overseeing development engineers and providing technical guidance for these technical areas. He would be able to perform development in these technical areas, too. Responsibilities for leadership include interfacing to the system requirements team, leading development from box requirements through integration testing, and supporting box testing. He also would be able to work with a remote design center developing other parts of the Access Point and supplier(s) providing hardware and software.
Specific Knowledge/Skills
This position requires prior experience and knowledge in many of the following areas: 802.11n, 802.11AC, OS & Networking, Security and User Management, and SNMP and UI. The candidate does not have to have detailed knowledge in all areas. Past experience in technical leadership of a development team is desired. Good verbal and written skills are required. Configuration management knowledge and the ability to direct this activity is a requirement. Educational background required is a BS/MS in EE, CE, CS, or related disciplines, or equivalent experience.

Click Here to Apply

Please include a cover letter and resume.
The Job ID should be in the subject line of the email.

Department Description:
The Product Management organization is responsible for defining Cambium’s product strategy and managing the entire life cycle for the company’s products. The organization’s product managers are responsible for defining, prioritizing, planning, driving the execution and creating the vision for their product lines. They work extensively with customers while working cross-functionally with the company in order to successfully prioritize features and develop the products that our customers need. They also provide the company with key consumer insights and trends.
Scope of Responsibilities/Expectations
Responsible for creating product roadmaps and release plans for the assigned product line and working closely with engineering to deliver successful products. Identifies a variety of customer needs across the application environment, drive feature prioritization and define product features and requirements. Understand customer needs and requirements and represent them in MRDs (market requirement document). Develops product plans (including target segment and value proposition) and business cases for assigned product or service. Responsible for identifying market size, preparation of business plans, and assists in pricing recommendations for the defined product and service portfolio. Understands the market and competition for the product set and develop product and competitive positioning. Develops and owns the go-to-market strategy to maximize market share, profitability, revenue retention and growth, and other strategic objectives. Owns the overall performance of the product in-market and is responsible for ensuring that the product achieves its financial objectives. Analyzes financial performance and recommends tactics to change the trajectory of the business. Manages all life cycle migration strategies and the end of life decision for existing products and services.
Specific Knowledge/Skills
5+ years in one or more of the following categories: telecommunications, hardware or software, with a focus on product management, product development or marketing. 3+ years wireless industry experience preferred Ability to assess and implement successful, focused, integrated product development plans. Knowledge of new product development processes and product life cycle management. Strong verbal and written communications skills, with the ability to convey business and technical concepts to subject matter experts and non-technical professionals. Ability to present compelling business cases to stakeholders. Experience in defining and executing go-to-market strategies. Knowledge of financial drivers, experience in managing return on investment objectives. Ability to create forecasts, financial models and budgets. Ability to influence, lead and coach cross-functional teams and champion new concepts and ideas. Broad understanding of program management concepts and tools, including technical, innovation process, product management, financial and operations functions.

Click Here to Apply

Please include a cover letter and resume.
The Job ID should be in the subject line of the email.

Department Description:

Cambium Networks develops Point to MultiPoint and Point To Point RF solutions in both unlicensed and licensed bands. Customers include tier 2 and 3 telephony operators, wireless internet service providers, enterprises such as utilities, and federal, state, and local governments. Point to MultiPoint technologies include both proprietary Canopy and standards-based protocols.

Scope of Responsibilities/Expectations

Cambium Networks is seeking an experienced and motivated Chief Architect/Engineer and Technical Authority interested in contributing to the success of an exciting and fast-moving company. The successful candidate will have a good appreciation of all aspects of wireless communications systems design, including FPGA, software, RF, digital, and antenna design and will have done detailed design in several of these areas. The candidate will be proficient in writing system level architecture documents and in system level modeling. The candidate should be experienced and interested in the entire system design cycle, from initial concept to final testing. In addition, the candidate should have a proven track record of innovation as demonstrated by leadership in R&D and awarded patents.

The candidate will have demonstrated his/her system design and leadership experience in technically leading several projects to successful completion and by commanding respect from the multidisciplinary engineering team through the display of skill and dedication. The candidate will have experience in working with software and hardware development teams and the ability to negotiate coherent and optimum solutions to system design problems.

Key responsibilities include:

• Leading the development of a technical roadmap for innovative products and features.
• Leading the definition of system architecture of next generation wireless products.
• Researching and designing PHY and MAC subsystems for custom and standards based wireless broadband networks.
• Performing feasibility studies and system simulations and prototype analysis.
• Assisting in the development of marketing requirements through research and customer engagements.
• Translating market requirements into technical system, module and product requirements.

Specific Knowledge/Skills

Required Skills/Knowledge/Experience:

• 15 years experience in wireless communication systems design, including detailed design in one of more of the following areas: Software, FPGA, Modem, or RF design
• MS/PhD in Computer Science, Electronics, Electrical or Communications Engineering or Physics
• Detailed understanding of digital communications theory and wireless systems including receiver and transmitter subsystems
• Excellent verbal and written communication skills

Desired Skills/Knowledge/Experience:

• Expertise and up to date knowledge of PHY and MAC subsystems in common wireless broadband protocols such as 802.16d/e, LTE, 802.11 or proprietary
• Expertise and up to date knowledge of LAN, WAN, and Wireless networking
• System Modeling experience; Matlab and/or SystemVue experience is a plus

Click Here to Apply

Please include a cover letter and resume.
The Job ID should be in the subject line of the email.

Department Description:

Canopy development engineering department.

Scope of Responsibilities/Expectations

Experience Level - 7 - 10 Years Design and implement diagnostic components within an existing software infrastructure. Tasks will include the creation of common, low level routines to access/control hardware devices. Create functional diagnostic test suites covering memory systems, address/data bus access, boot level components, and high speed serial interfaces and RF circuitry in the 1 to 6 GHz range.

Work with Hardware engineers involved with FPGA and board design testability issues and support/assist the manufacturing and field service organizations with debug and fault isolation problems. Strong development background using Labview programming environment. Strong hardware debug and fault isolation background. Strong written communication skills in the form of Functional, Design, and Test Plan Documentation. Experience with embedded system environments and device driver experience in Labview environments. Experience with the Altera FPGA chip family. Draw wiring diagrams, circuit board assembly diagrams, schematics, and layout drawings used for manufacture, installation, and repair of electronic equipment.

Additional job responsibilities would require the interaction with our local Mechanical Team to design and implement factory test fixtures as well as overseeing the successful transition of Factory Test systems in to a NPI and/or Production manufacturing facility both nationally and internationally. Travel to our manufacturing facilities for local support will also be required.

Specific Knowledge/Skills

• Labview software programming.
• High frequency RF test knowledge.
• Thermal audit functional test methodology
• Familiar with RF test equipment/Network analyzers
• Hardware fixture design and implementation strategy
• FMEA and circuit debug methodology

Click Here to Apply

Please include a cover letter and resume.
The Job ID should be in the subject line of the email.

The PMP organization develops Point to MultiPoint RF solutions in both licensed and unlicensed bands. Customers include tier 2 and 3 telephony operators, wireless internet service providers, enterprises such as utilities, and federal, state, and local governments. Point to MultiPoint technologies include both 802.x standards and Canopy proprietary air interfaces.

• Participate as a member of a multi-disciplinary team.
• Responsible for learning the PMP product line, solving product problems, and how to implement and test product firmware.
• Learn and participate in all phases of projects, from requirements through coding, test bench design verification, and field support.
• Responsible for creating and maintaining design and verification documentation.
• Responsible for defining and conducting testing methods.
• Expected to elevate the productivity of the team through process improvements, automation, and fresh ideas.

• Trained in designing, coding, and debugging embedded software.
• Proficiency in C, C++
• Trained in IP protocols, especially layers 2 and 3
• Some experience with embedded device drivers and lab debug equipment
• FPGA coursework or design experience, a plus
• Training or experience in web technologies, PHP/MySQL, or python, a plus
• Knowledge of configuration management and bug tracking systems
• Excellent communication skills
• Experience working both independently and in a team-oriented, collaborative environment is essential.

Click Here to Apply

Please include a cover letter and resume.
The Job ID should be in the subject line of the email.

The PMP organization develops Point to MultiPoint RF solutions in both licensed and unlicensed bands. Customers include tier 2 and 3 telephony operators, wireless internet service providers, enterprises such as utilities, and federal, state, and local governments. Point to MultiPoint technologies include both 802.x standards and Canopy proprietary air interfaces.

• Participate as a member of a multi-disciplinary team.
• Responsible for implementing and testing VHDL for a variety of advanced wireless communications products.
• Participate in all phases of projects, from requirements through implementation, test bench design verification, and field support.
• Responsible for creating and maintaining design and verification documentation.
• Responsible for defining and conducting testing methods.
• Expected to elevate the productivity of the team through process improvements, automation, and fresh ideas.

• Programmable logic design experience with VHDL, modeling/simulating, and debugging for wireless broadband network products.
• Experience with timing analysis and closure with Timequest/Synopsys Design Constraints.
• Digital circuit design and debug experience with embedded solutions, including schematic capture through integration and test.
• Experience in RF (OFDM modem) technologies or fast packet switching / data links is highly desired.
• Experience with DSP blocks and complex microcontroller systems.
• Experience with Altera tool chain, a plus
• Proficiency in C programming language and IP protocols, a plus
• Experience with configuration management and bug tracking systems
• Excellent communication skills
• Experience working both independently and in a team-oriented, collaborative environment is essential.

Click Here to Apply

Please include a cover letter and resume.
The Job ID should be in the subject line of the email.

The PMP organization develops Point to MultiPoint RF solutions in both licensed and unlicensed bands. Customers include tier 2 and 3 telephony operators, wireless internet service providers, enterprises such as utilities, and federal, state, and local governments. Point to MultiPoint technologies include both 802.x standards and Canopy proprietary air interfaces.

• Participate as a member of a multi-disciplinary team.
• Help breakdown, prioritize, and assign work items to team members.
• Participate in investigations and estimations for new features.
• Responsible for implementing and testing VHDL for a variety of advanced wireless communications products.
• Participate in all phases of projects, from requirements through implementation, test bench design verification, and field support.
• Responsible for creating and maintaining design and verification documentation.
• Responsible for defining and conducting testing methods.
• Expected to elevate the productivity of the team through process improvements, automation, and fresh ideas.

• Programmable logic design experience with VHDL, modeling/simulating, and debugging for wireless broadband network products.
• Experience with timing analysis and closure with Timequest/Synopsys Design Constraints.
• Digital circuit design and debug experience with embedded solutions, including schematic capture through integration and test.
• Experience in RF (OFDM modem) technologies or fast packet switching / data links is highly desired.
• Experience with DSP blocks and complex microcontroller systems.
• Experience with Altera tool chain, a plus
• Proficiency in C programming language and IP protocols, a plus
• Experience with configuration management and bug tracking systems
• Excellent communication skills
• Experience working both independently and in a team-oriented, collaborative environment is essential.